Router os for raspberry pi5/27/2023 This display interface can be used for interacting with the carrier board. This has a MIPI DSI display interface, and you can connect a display via a 15-pin DSI flex cable. Tip: Click here for a higher resolution image DSI Display Interface This camera interface can be used for object detection and machine learning applications. ![]() This has a MIPI CSI camera interface, and you can connect a camera via a 15-pin CSI flex cable. ![]() Tip: Click here for a higher resolution image CSI Camera Interface Tip: Click here for a higher resolution image Schematics of USB 3.0 to GbE (Gigabit Ethernet Bridge) Schematics of Dual Gigabit Ethernet Ports Also, both ports can support speeds up to 1Gbps. The USB 3.0 interface here is extended from the PCIe interface of the CM4 Module. On the the hand, the other Gigabit Ethernet Port is connected to Microchip's LAN7800 which is a USB 3.0 to GbE (Gigabit Ethernet Bridge). One Ethernet Port is connected to the Gigabit Ethernet PHY of the CM4 module which is based on Broadcom BCM54210PE. ![]() This carrier board features 2 x Gigabit Ethernet Ports (RJ45). ![]() Tip: Click here for a higher resolution image Dual Gigabit Ethernet Ports This carrier board has a 200-pin interface with 2 rows of 100 pins each, so that you can connect a Raspberry Pi Compute Module 4 and realize your projects! Schematics Hardware Introduction 200-Pin Interface for Raspberry Pi Compute Module 4 Otherwise it may cause USB or Ethernet instability Hardware Overview Due to the high level of integration of this product, it must be used with a CM4 heat sink.
0 Comments
Leave a Reply. |